MODEL RF3000SC-300 SPECIFICATIONS
(Unit shown with options)
CAPACITY
3000 gallons plus 3% expansion space.
TANK
One compartment. Shell, heads and baffles constructed of aluminum.
CHASSIS
Conventional style with diesel engine, automatic transmission.
DIMENSIONS
Height 110”
Width 96”
Length 24’
REFUELING SYSTEM (300 GPM)
Internal valve:
3” with high-level shutdown.
Vent:
5”
Fuel/Defuel valve
Pump:
300 GPM centrifugal
Deadman and pressure control:
3” electrically operated.
By-pass valve
Filter/Separator:
300 GPM with air elimination and differential pressure gauge.
Electric float with manual water drain.
Venturi:
3” sized to compensate for pressure loss.
Meter:
3” nonferrous, 300 GPM with large numeral counter.
Shutoff valve:
One at each hose reel and bottom load adapter.
Hose Reels:
(2) nonferrous internals and swing joint, explosion-proof electric rewind.
Hose Discharge:
(1) 2”x50’ and (1) 1 ½”x50’.
Nozzle:
(1) underwing with 100 mesh screen and swivel disconnect, (1) OPW 295SAJ
overwing.
Static Grounding Reel:
Spring rewind with 50’ of cable.
Bottom load adapter with shutoff valve.
High Fuel Level Shutdown:
Jet sensor with precheck test.
Brake Interlock System:
Nozzles, pumps, bottom load.
All stainless steel piping.
Manhole:
(1) 16” with 10” fill located at center of tank.
Ladder Brackets:
Rear mounted.
Tank and drain valves:
(2) 1” installed at each end of tank.
One fueling pressure gauge and air system pressure gauge installed on control panel.
Fire Extinguishers:
(2) UL rated, 20#, dry chemical with mounting brackets.
Design complies with NFPA 385 and 407 standards.
Entire refueler tested to 300 GPM flow rate, all controls are clearly labeled.
PAINT
AVAILABLE OPTIONS
